So, we have seen that it is possible to trick an F5 into thinking its an F55 by altering an all file from the F5 and adding some F55 4K settings. This enables 4K internal recording and 4K output over HDMI on the F5. Internal 4K is one of the key differences between the lower cost F5 and the much more expensive F55. Another major difference is that the F55 has a global shutter so no CMOS image skew or other rolling shutter artefacts and the F55 has a larger colour gamut allowing better colour rendition and capture.
A question that has been asked is: Well if we can get 4K, can we also enable the larger colour gamut? One thing we do know is that the sensor used in the F55 is different to the sensor in the F5 as the sensor is replaced if you upgrade your F5 to an F55.
A cameras gamut is determined more by the sensors colour filters than the recording gamut. The recording gamut is like a bucket, the sensor a scoop. If the scoop isn’t big enough you won’t fill the bucket.
The color filters on the F55 are very different to those in the F5, so the F55 can capture a much greater gamut than the F5.
If you think about it, if you hold a red gel up infront of your eyes you will only see an extremely narrow colour gamut, just a single narrow part of the red spectrum. Imagine if you have a red, green and blue filter, you will now see a bit of red, a bit of green and a bit of blue. But you might only see a very narrow part of the full blue spectrum or a very narrow part of red or of green, you won’t see the full spectrum or a large gamut, just narrow slithers of it. The trick is to make filters that are wide enough and with the righ charcteristics to pass all of the R, G and B spectrum but sharply cut off unwanted colors, infra-red or UV at the exactly the right point. This is very hard to do. So the quality and accuracy of the color filters determines both the gamut and the precision of the colors that the camera can capture.
In practice it can be hard to see this difference as none of the monitors available today can show the full gamut that the F55 can capture so you can’t directly see it. But it does make a difference in post as the F55 is able to separate subtle hues more accurately and capture an extended tonal range, for example very subtle differences in skin tones that may be lost on a camera with poorer filters. This means when grading you are able to draw more tonal information out of the image when you transform the color space in to Rec 709 or DCI-P3 and it results in a more natural looking image.
The F5’s sensor gamut is probably somewhere around the size of DCI P3, maybe a bit bigger, but it’s clearly not as big as the F55’s. In addition the colour precision is not as great so some subtle tones are lost. It’s not a massive difference and the F5 does a great job. It’s not something that can be changed with software, it’s all down to the sensor hardware. The F5 just can’t fill the S-Gamut recording bucket so by using S-Gamut your wasting a lot of data. By using a smaller recording gamut like S-Gamut3.cine you can more effectively fill the bucket and make better use of the data available to you.
If you like what you read here, please also visit and subscribe to my YouTube Channel by clicking here. Thanks.