IMPORTANT PLEASE ENSURE YOU USE THE REVISED SETTINGS UPDATED ON 24th JULY.
After my recent side by side look at the F3 and FS700 and seeing how different the two cameras look, I decided to try to match them a bit better. There will be many shoots where I will use them both together so getting them to look the same is important. I thought this would be a relatively straight forward task, simply dial in the FS700 to match the F3.
Well it wasn’t simple and it ended up taking me several hours to get to the point where I couldn’t get them any closer. The main issues are that the F3, like most of the XDCAM cameras has a yellow colour cast that’s hard to completely remove and the FS700 has quite a blue image and only very limited matrix controls. Initially I started to try to match the FS700 to a standard F3. While I could get the FS700 closer to the F3, I just couldn’t get a near match let alone a complete match. So back to the drawing board.
For my second attempt I decided first to work on getting rid of the yellow/orange cast to the F3 pictures by adjusting the F3’s matrix, at the same time creating a neutral look picture profile with good dynamic range, but one that could be used without grading. This took some extensive matrix tweaks. You will find the full details of my new “STD-REAL” picture profile in the forum by clicking here.
So once I had a neutral starting point on the F3 I then turned to the FS700 which I think is very blue. The matrix settings on the FS700 are quite limited so I wasn’t able to get an exact match to the F3, however the setting I came up with get them close enough for most jobs, it’s not perfect but it will do. I’m quite happy with my new FS700 settings and I think with this profile it produces a very nice image. You can find the full profile settings in the forum by clicking here. Remember you need to use the matching F3 profile in the F3 for the best match. If you want the maximum dynamic range then instead of Cinegamma 1 you should use Cinegamma 4 with the black gamma set to zero. My STD REAL profile for the FS700 is closer to a standard F3 than the default FS700 settings.
If you like what you read here, please also visit and subscribe to my YouTube Channel by clicking here. Thanks.
Hi Alister,
I just bought an F3 that I was told had the S-log upgrade. However I only seem to have one video profile available while S-log is greyed out. Did I get scammed or are there some settings that are preventing me from selecting S-log. The camera says its running v1.45.
Thanks!
S-Log was added as a standard free gamma option in firmware V1.4. So if you camera is V1.45 it will have S-Log as a gamma option in the picture profiles – of which there should be 6.
Thanks Alister. Found it! Appreciate the reply.